Lightly textured acoustic plaster
The Albus acoustic plaster finish can be applied on virtually any surface in every environment including straight and curved walls, dramatic angles and arching domes offering a more flexible, discreet alternative to traditional acoustic solutions, such as suspended ceilings.
A lightly textured medium grain white finish available in pure white to suit design requirements.
Fibreglass Board and Fade applied to a plasterboard, concrete or timber substrate. The fibreglass board is attached to a substrate with approved adhesives or mechanically fixed with special washers.
The substrate is tested for bond strength and cleaned. Alternatively if paint is flaking the mechanical fixings should be used. The fibreglass board is attached to the painted substrate with the approved adhesive and additionally secured with a minimal amount of special washers if required.
The fibreglass board is attached to a MF metal drywall grid system or similar with the special washers.*
In all installations the fibreglass board is then sprayed with the Fade Acoustical Plaster system and troweled nicely.
Once dry the system can be sanded to achieve the desired finish.
The official fibreglass board thickness is 20mm, 25mm or 40mm. Other thicknesses are available on request.
In the event that the building is not airtight, the air will circulate through the open pored acoustical plaster system leaving heavy localized dust deposits